YAESU FT-710 Aess

HF/50 MHz/70 MHz SDR transceiver - Output 100 W
With free Yaesu Cap

Excl VAT
Incl VAT
YAESU FT-710 Aess
Art. 3050173
In stock. Delivered in 2-5 working days
Excl VAT € 971,07
incl VAT € 971,07
Per 1 St.
All prices excl. shipping costs
VAT will be automatically recalculated for the country, of which the flag on top has been chosen.

Please register with EU VAT-ID-No. before ordering online the first time. After manual check we will change VAT into 0%. Existing customer, please login first.
The new Yaesu FT-710 Aess compact SDR Transceiver with full SDR configuration.

The new Yaesu FT-710 is No. 4! on the Sherwood list (Download Sherwood Receiver Test Data)

Unlike the FT-DX series with Down Conversion in the front end, the new Yaesu FT-710 Aess uses the full Direct Sampling SDR configuration.

The HRDDS (High Resolution Direct Digital Synthesizer) ensures a quiet and clear reception. The heart of the new FT-710 Aess uses the 250 MHz HRDDS method, the same as the FT-DX101 models. Thanks to its features that improve the C/N (carrier to noise) ratio and the careful selection of components in the design, the phase noise of the DDS achieves an excellent low value of -143dB or less at 14MHz at 2kHz signal spacing.

This Sampling SDR configuration with the extremely low noise oscillator, the RMDR (Reciprocal Mixing Dynamic Range) reaches 113 dB or more, the close-in BDR (Blocking Dynamic Range) reaches 127 dB or more, and the 3rd IMDR (Third Order Intermodulation Dynamic Range) reaches 102 dB or more, in the 14 MHz band at 2 kHz signal spacing.

New: AESS (Acoustic Enhanced Speaker System). The combination of the internal speaker and the included external speaker SP-40 and the digital audio processing of the FT-710 produces high audio quality with a wide spectrum and gives a 3- D acoustic effect. The balance and frequency response of both speaker systems can be adjusted to personal preference in the menu. The external speaker SP-40 can be mounted on the right or left side. Attention ! When mounted on the left, the slot of the SD card reader is covered.

Frequency Range : RX 30 kHz - 75 MHz; TX 1.8 - 54 MHz (TX mode 70 MHz after soft mod.). HAM bands only. On request TX Modification free of charge
Modulation Type : AM(N), FM(N), LSB, USB, CW(L/U), DATA(L/U), DATA FM(N), RTTY(L/U), PSK
Power output : 5-100 watts (AM 5-25 watts; FT8/FT4: 40 watts max!)
Dimensions : W239 x H80 x D247 mm
Weight : 4.5 kg

Some extraordinary features are:

  • Frequency bands: 160, 80, 60, 40, 30, 20, 17, 15, 12, 10, 6 and 4 meters (TX mode must be activated).
  • Separate band-pass filters prevent overloading by strong out-of-band signals
  • Effective QRM suppression with the IF DSP (IF SHIFT/WIDTH, IF NOTCH DNF, DNR, COUNTOUR)
  • High-quality and super stable power amplifier with the new push-pull MOSFET RD70HUP2
  • Aluminum cooling block with low-noise axial fan
  • High Speed ??Automatic Antenna Tuner with 100 memory locations
  • HF & audio monitor function of own transmission signal
  • Microphone amplifier with triple parametric equalizer (SSB/AM mode)
  • QMB (Quick Memory Bank)
  • Band Stack Function for 3 frequencies per band
  • Large Touch Panel 5-inch Full-Color TFT Display
  • 3DSS (3 dimensional spectrum scope) Waterfall Display
  • connection for external speaker SP-40 AESS (supplied as standard; can be mounted on the left or right)
  • DVI-D connection for external monitor*)
  • 2 x USB ports; type-A and type-B
  • SD Card Slot

Included accessories:

- Microphone SSM-75E
- SP-40 AESS speaker (Acoustic Enhanced Speaker System)
- DC power cable with / fuse
- Extra fuse
- Manual English

The monitor shown is not included in the scope of delivery and is not a Yaesu accessory.

Both brochure and owners manual can be downloaded via the links (on the right).

*) Attention! The DVI output may be damaged due to potential difference between monitor and transceiver.

With some monitors with a built-in power supply, leakage currents can create unwanted voltage on the chassis. Equalization then occurs when the monitor is connected to the transceiver.

Therefore, always first connect all jumper cables between the various devices and peripherals without the equipment being switched on. As a result, any potential differences are equalized in advance. It is even safer by first installing all jumper cables and only then plugging the mains plugs of the devices into the mains socket. Any potential difference is then completely excluded.

Using a reverse MX-610 duplexer, separate 6m and HF antenna systems can be connected to the single SO-239 antenna connection.

==>    Claim here your Cashback online within 30 days from date of purchase

Dimensions and weight are including packaging
Dimensions  :  L50 x B38 x H23 cm
Weight  :  8,00 kg