Yaesu M-100 Dual-Element Desktop Microphone.
The
Yaesu M-100 features two built-in microphone elements, one dynamic and one condenser type. The unique output signals may be individually crafted and then blended to produce a single rich voice signal. The included treble boost cowling may be installed to block sounds from the side.
Specifications
| Element | : | Dynamic and condenser |
| Frequency response | : | 30 Hz - 17000 kHz |
| Sensitivity | : | - 60 dB (1 kHz 0 dB=1V/1Pa) |
| Impedance | : | 600 Ohms |
| Supply voltage | : | 5 VDC / 35 mA |
| Dimensions | : | 126 x 280 x 137 mm |
| Weight | : | 910 g |
| Buttons | : | PTT, PTT-Lock, On/Off switches for dynamic and condenser element activation |
| Filter | : | High-Cut Off (-6 dB oct / 2 kHz) |
| Filter | : | Low-Cut Off (-6 dB oct / 340 Hz) |
| Connector | : | 8-pole round and RJ 45/modular.*) |
Pinning
Pin 1 - NC
Pin 2 - +5V
Pin 3 - NC
Pin 4 - NC
Pin 5 - Ground
Pin 6 - PTT
Pin 7 - Mic Gnd
Pin 8 - Mic
The
M-100 is suitable for:
- FT-450D
- FT-817ND
- FT-818ND
- FT-847
- FT-857/D
- FT-891
- FT-897/D
- FT-900
- FT-920
- FT-950
- FT-991/A
- FT-1000MP
- FT-2000
- FT-DX1200
- FT-DX3000
- FT-DX5000
- FT-DX9000
- FT-DX101D/MP
- FT-DX10
*) The RJ45 and 8P sockets in the base of the MD-100 are internally connected 1:1. The supplied microphone cable has RJ45 on one side and an 8-pin round plug on the other. You can therefore use the cable for devices with RJ45 as well as for devices with an 8-pin round microphone plug. Simply reverse the cable.
Dimensions and weight are including packaging
| Dimensions |
: |
L29 x B22,5 x H18,5 cm |
| Weight |
: |
2,10 kg |