The Hustler SSM-1 heavy-duty mobile mount
with ball joint has been developed as a mast base for Hustler HF mobile antennas. Hustler HF mobile antennas are used on vehicles, vessels and sometimes also as base antenna. In order to absorb the impacts while driving, the SSM-1 is equipped with a heavy duty stainless steel spring.
For mounting the base plate 3 mounting holes are provided. An adjustable ball joint is located on the ABS base plate, so that the mount / antenna can be mounted in any desired position. The ball halves of the SSM-1, heavy-duty mobile mount are made of stainless steel. The ball has a diameter of 60 mm. The coax cable is connected directly at the bottomside of the foot.
The base is suitable for all Hustler masts MO-1, MO-2, MO-3 and MO-4 and mobile antennas from other manufacturers with a 3/8 "connection.
|Material|| : ||stainless steel and ABS|
|Diameter ball|| : ||60 mm|
|Material spring|| : ||stainless steel|
|Connection|| : ||3/8 "|
The mobile mount comes standard with all the necessary hardware for mounting. A suitable hex key is also supplied for setting the ball joint.
If you want to drive with the Hustler system, we recommend using a foot with spring, eg the C-29 or C-30. The spring absorbs the mechanical forces between the foot and the mast, which can occur during movements of the vehicle. Whether or not to apply such a spring hardly affects the alignment of the center-loaded antenna system. Tuning is done with the tip of the resonator.
Dimensions and weight are including packaging
||L29 x B13 x H7 cm