The new professional ST-30 is a high performance µ-processor controlled FM RADIO broadcast mono/stereo transmitter with very low THD - IMD distorsion and SCA, RDS and MPX facility.
Features
- Frequency 87,5-108 MHz
- Excellent stereo and mono operation
- Extremely low distortion THD-IMD
- Very low noise
- High stereo performances
- µP controlled - RDS facility - digital input audio facility
- Seven memory programs, step frequency 10 kHz
- Easy frequency programming and set-up
- Full broadband BW > 20 MHz
- Remote control and programming RS485
- Full control and protection of output power and deviation
- Very reliable, compact, strong and long service
- Compliance to C.C.I.R. & F.C.C. Standards
RF Characteristics
Power Output | : | 30 W adjustable from front panel |
RF output impedance | : | 50 Ohm unbalanced, VSWR less than 1.5:1 |
Frequency range | : | 87.5 to 108MHz, 7 channels (10 kHz / step µp selected) storable and recalled from panel |
Frequency control | : | Synthesizer µ-processor controlled |
Off lock attenuation | : | > 80dBc (typical -85 dB) |
Type of modulation | : | F3E / F8E direct FM at the carrier frequency |
Modulation mode | : | Mono, Stereo, Multiplex, SCA, RDS, AUX (input selected by front panel) |
Frequency deviation | : | ±75kHz = 100%, ±150 kHz capability |
Short term stability | : | ± 1ppm from -5 to +45°C, can be synchronized by 1-2-2.5-5-10MHz |
Instantaneous BW | : | > 20MHz |
RF harmonics | : | Exceeds EBU/CCIR/FCC requirements < -70dBc |
RF spurious | : | Exceeds EBU/CCIR/FCC requirements < -100dBc @ ± 1MHz min. (typical -110dB) |
Preemphasis | : | Flat/50/75µs selectable via front panel – precision typical 0,4% |
Stereo operation | : | CCIR 450/S2 "pilot tone system" |
Stereo Operation
Stereo Separation | : | >53 dB (typ. 56 dB) 30 ÷ 80 Hz , >60 dB (typ.70 dB) 80 Hz ÷ 15 kHz |
Crosstalk attenuation (M / S) | : | > 40 dB 30 Hz ÷ 15 kHz (typ. 55 dB 100 Hz ÷ 8 kHz) |
THD+N on encoded channels | : | < 0.03% 30 Hz ÷ 15 kHz (typ. -74 dB) |
IMD - Distortion | : | < 0.03% Typ. IMD D2 < -83 dB D3 < -88 dB |
Audio filter attenuation | : | > 55 dB @ 19 kHz ; > 45dB 19 kHz ÷ 100 kHz |
Common mode rejection | : | > 45 dB 20 Hz ÷ 15 kHz |
Spurious products | : | > 53 kHz > 50 dB |
38 Hz suppression | : | > 70 dB (typ. -85 dB) |
Sub carrier frequency | : | 38 kHz ± 2 Hz |
Pilot frequency | : | 19 kHz ± 1 Hz |
Phase difference | : | 19/38 kHz 0°± 2° adjustable |
TIM (DIM30) | : | < 0.03 % (square/sinus) Typ. < -77 dB |
Nominal pilot deviation | : | ± 7 kHz |
Mono Operation
Audio response | : | ± 0.15 dB 20 Hz ÷ 15 kHz (+0 / -2%) |
THD+N on encoded channels | : | 30 Hz to 15 kHz < 0.02% ( typ. 0.03% ) typ. -74 dB |
IMD | : | D2 < -75 dB , D3 < -80 dB (Typ. D2<-80 dB, D3< -85 dB) (measured with a 1 kHz and 1.3 kHz tones, 1:1 ratio, @ FM 75kHz) |
TIM (DIM30) | : | < -70dB (Typ. < -77dB) (measured with square wave 2.96 kHz - sine wave 14 kHz @ 75 kHz FM ) |
Physical & Electrical
Dimensions | : | Standard 19" chassis rack |
Cabinet | : | D 385 mm x W 485 mm |
Antenna output | : | N connector female |
Weight | : | 4.5 kg approx. |
Power supply | : | 230V single phase AC (+10 / -15%) 50-60 Hz ± 5% |
Human interface input device | : | Rotary encoder with pushbutton or USB |
Acoustic Noise | : | < 56dBA Leq 3min @ 1m |
Cooling | : | Forced air, with internal long life brush-less ball bearing fan |
Environmental
Storage temperature | : | - 20°C + 60°C |
Operating temperature | : | - 5°C + 45°C |
Guaranteed performances temp. | : | 0°C + 40 °C |
Relative humidity | : | 90% max (no condensing) |
Max. operating altitude | : | 2000 m |
Max. extraneous field strength | : | =10V/m ; = 4A/m |
Dimensions and weight are including packaging