YAESU FT-2900E

2 m FM mobile Transceiver Output 75 W

 
Description
Excl VAT
Incl VAT
Per
Qty
 
YAESU FT-2900E
Art. 30503521
Excl VAT € 136,36
incl VAT € 165,00
Per 1 St.
Temporarily sold out
All prices excl. shipping

High power output with No Cooling Fan Needed, a huge, easy-to-read display, and one-touch WIRES™ Internet Linking Access capability are yours with the rugged new FT-2900R!

Features

75 Watts Power Output
Four selectable power output levels are provided: 75/25/10/5 Watts. The power selection may be stored into memory, allowing you to conserve power while using strong local repeaters.

Large LCD Display
The large 6 digit backlit LCD on the FT-2900R ensure excellent visibility

Excellent Receiver Performance
The FT-2900M’s receiver front end features Yaesu’s renowned Advanced Track Tuning RF input filtering, which affords outstanding protection from Intermodulation distortion.

CTCSS and DCS Encode/Decode Built In
For easy repeater access, or silent monitoring of busy channels, both CTCSS and DCS (Digital Code Squelch) Encoder/Decoder circuits are built in. CTCSS and DCS configuration data may be stored independently in each memory channel. A “Split Tone” mode also allows operation on systems where CTCSS and DCS are used separately on the repeater uplink/downlink.

Extensive Memory System
The FT-2900E provides a total of 221 memory channels, including 200 “regular” memories, ten pairs of band-limit memories, and an instant-recall “Home” channel you can dedicate to a frequently-used repeater or simplex frequency. Memories can store repeater shift information, CTCSS/DCS data, power output level, scanning status (“Skip”), and Alpha-Numeric labels.

Alpha-Numeric Channel Display
Memory channels may be displayed either with the channel frequency or a personalized Alpha-Numeric label, for easy channel recognition. Up to six letters, characters, or numbers may be used for labeling channels.

MH-48A6J DTMF Direct Access Microphone
The backlit MH-48A6J microphone allows direct keypad frequency entry, or keypad memory channel recall. On transmit, the MH-48A6J allows manual entry of DTMF tones for autopatch use, and the FT-2800M also includes a nine-memory, 16-digit DTMF Autodialer. Four user-programmable “soft” keys on the microphone may be programmed for easy control of a number of different features, and the [A]/[B]/[C]/[D] keys replicate the functions of the keys on the front panel of the transceiver, for maximum convenience while driving.

General

Frequency Range Receive : 137-174 MHz
Frequency Range Transmit : 144-146 MHz
Channel Steps : 5/10/12.5/15/20/25/50/100 kHz
Frequency Stability : Better than ±10 ppm (-20°C to +60°C)
Mode of Emission : F2D/F3E
Antenna Impedance : 50 Ohm, Unbalanced
Operating temp range : -4° to +140°F (-20°C to +60°C)
Supply Voltage : DC 13.8V ±15%, Negative Ground
Current Consumption (typical) :  RX: Less than 0.7A (max. audio) | Less than 0.3A (Squelched)
 : TX: 15A (75W) / 9A (30W) / 5A (10W) / 4A (5W)
Operating Temperature Range : -20°C to +60°C (-4°F to +140°F)
Case Size : 6.3 x 2.0 x 7.3 inches (w/o knobs) | 160(W) x 50(H) x 185(D) mm
Weight : 4.0 lb. (1.9 kg)

Transmitter
RF Power Output : 75/25/10/5 Watts
Modulation Type : Variable Reactance
Maximum Deviation : ±5 kHz / ±2.5 kHz
Spurious Radiation : Better than -60dB
Microphone Impedance : 2 K Ohm

Receiver
Circuit Type : Double-Conversion Superheterodyne
Intermediate Frequencies : 21.7 MHz and 450 kHz
Sensitivity (12dB SINAD) : Better than 0.4uV
Selectivity (-6/-60 dB) : 12 kHz/28 kHz
IF Rejection : Better than 70 dB
Image Rejection : Better than 70 dB
Maximum AF Output : 3 W into 4 Ohm @ 10% THD

Specifications are subject to change without notice, and are guaranteed within amateur bands only.
Frequency ranges and repeater shift vary according to transceiver version.