The INAC AH-1430(H)
, is a halo antenna of small size but has high performance. Supports an RF level between 140 and 210 W (H type = 160-300 W). Covers bands used between 12 and 30 Mhz: 20, 17, 15, 12 and 10 meters. With remote continuous tuning in a very short time, less than a second. Its high selectivity makes it behave as a filter for reception and transmission. The small compact loop antenna performs equally as well as a half wave dipole or vertical.
By the use of stepper motor technology
in the loop, the supplied controller LAC-1 allows extremely fast and easy tuning of the antenna. It only takes 3 seconds to tune the loop from the lowest to the highest frequency with 5 kHz fine tuning accuracy. Any change in the position of the tuningpot on the controller will be immediately taken over (real time) by the loop motor which operates the tuning capacitor.
The controller supplied has noise generator integrated.
The antenna can be tuned without transmitter and SWR/power meter and is therefore very suitable for shortwave listeners as well. Pressing the red PUSH button on the controller will activate the stepper motor and the noise generator. No power consumption in receive mode.
Available controllers are LAC-1 and LAC-2
. LAC-1 is the standard version; the luxury LAC-2 has only one tuning dial, which is provided with a vernier reduction ball drive, which drives the potentiometer that adjusts the pulse-shaped control signal. As an additional tool the LAC-2 has a clear scale display indicating the position of the tuning cap in degrees.
In addition to the modest dimensions, the limited bandwidth of the loop adds a filter function for transmitter and receiver. When positioned vertically the antenna has directivity.
All INAC loop antennas are supplied in color white.
To adjust the color to its environment please use our PlastiDip liquid rubber
. One spray can is sufficient for complete coverage. The adhesion is static. The coating can also be easily removed.
|Frequency range|| : ||13.900-30.000 MHz|
|Gain|| : ||1,25 dBi, depending on frequency|
|Bandwidth|| : ||24 - 130 kHz, depending on frequency|
|Max. power|| : ||140-210 W PEP (H type = 160-300 W PEP), depending on frequency|
|Dimensions loop|| : ||79 x 63 cm|
|Connector|| : ||SO 239|
|Controller|| : ||LAC-1 resp. LAC-2 included|
|Supply Voltage|| : ||13,8 VDC / 1,5 A|
|Mast Size Range|| : ||ø 40 mm stub mast 32 cm long is included *)|
|Control cable|| : ||3 wire control cable; 5 m long with connectors included **)|
|Wind resistance|| : ||120 km/h (depending on mounting height)|
|Weight|| : ||4,5 kg (H type = 6,2 kg)|
*) Universal mounting clamp (stainless) steel is optional
**) Adapter cable to extend control cable is included
AH-521 (7-21 MHz), AH-376 (3.5-7 MHz) and AX-314 (3.4-14.9 MHz)
Optional LAC 2 de Luxe controller will soon be available.